Lassen SQ GPS Receiver 8 7
Trimble Standard Interface Protocol (TSIP) A
The Altitude Flag determines whether or not the Reference Altitude
will be used. If set, it will be used. If cleared, altitude hold (last 3-D
altitude) is used.
Note – With no data byte, this packet requests the current values of
these altitude parameters. In this case, the GPS receiver returns
Packet 4A.
This packet sets or requests the altitude parameters used for the
Manual 2-D mode: Reference Altitude and Altitude Flag. Packet 0x4A
(9 byte format) is returned.
Note – With no data bytes, this packet requests the current values of
these altitude parameters. In this case, the GPS receiver returns
Packet 4A (9 byte format).
Table A.13
Packet 0x2A Set Reference Altitude Description
Byte
Item
Type
Definition
0-3
Altitude
Single
Reference altitude for 2-
D
Table A.14
Packet 0x2A Clear Reference Altitude Description
Byte
Item
Type
Value
Definition
0
Altitude Flag
UINT8
0 x FF
Clear Altitude flag
Summary of Contents for SQ
