Lassen SQ GPS Receiver 2 9
Hardware Integration 2
2.6
Mounting
The Lassen SQ GPS PCB is encased in a metal enclosure. The
enclosure acts as a protective case. There are four mounting solder
tabs on the bottom of the enclosure. When the surface-mount mating
connector is used, the mounting tabs may be used for securing the
Lassen SQ GPS module on the user’s PCB. When the cable strip I/O
connector scheme is used, the connector side of the Lassen SQ GPS
module will be faced up and the mounting tabs will be on the top of
the module away from PCB.
The Lassen SQ GPS module can be attached to the integrator platform
by many methodologies including solder, glue, double sided adhesive
tape, and custom hold down mounts for the module's mounting tabs.
Note – See Appendix D for mechanical drawings and specifications
regarding the spacing of the mounting tabs and the dimensions of the
enclosure.
Summary of Contents for SQ
