LaserPro Mercury II, User Manual

Page: 69 / 77

- 68 -
Mercury II User Manual
5.2.3.7 Mercury II Print Driver >> Stamp Page
Producing stamps require different operational steps than your standard engraving or
cutting jobs. The Stamp page offers dynamic options allowing you to customize your stamp
production process.
NOTE
The Stamp page will only appear and be accessible when you have selected the
Stamp Mode from the Option Page.
TIP
Functions located on the other pages that are useful when making a stamp: Set
Shoulder, Pitch, Border, Invert, and Mirror .
„ Pitch (Stamp Page)
„ Your stamp will be a reversed image composed of engraved depressions and
ridges. Think of these ridges as the “contact sections” of the stamp. If the
ridges of these contact sections are too thin, they may break. The Pitch setting
Base of ridge (Pitch)
Slope of ridge
(Shoulder Level)
Ridge:
“Contact section” of
the stamp