MERCURY II User Manual
- 5 -
advised to have air compressor turned on to prevent flame.
2. If cutting table, or honeycomb table, is used for cutting purpose, do not leave any
material underneath, as when material at top is cut through, the material at below will
be burned easily due to trapped heat.
3. It is not encouraged leaving the cutting job unattended, especially with materials
mentioned above.
1.5 The Safety Interlock System
The LaserPro MERCURY is complete with a safety interlock system that automatically
shuts off the power supply to the laser whenever the top or front door is opened. There are
magnets on the top and front door, which activate this safety mechanism. Do not attempt
to remove or modify these magnets or any other component of the safety interlock system.
1.6 Warning Label
On the surface of Carriage
On the front cover of Laser Tube
On the front center of the top door
On the backside of the machine
Summary of Contents for Mercury II
Page 1: ......
Page 49: ... 48 Mercury II User Manual ...