Mercury II User Manual
- 22 -
5.1.2 Graphic Control Panel Overview (Description)
The Control Panel
The control panel on the LaserPro Mercury II provides an easy access to all the manual controls
needed for cutting and engraving. The LCD screen, functional, directional and selection buttons
make navigating through the machine’s manual controls easy to do.
LED INDICATOR LIGHTS
Three indicator lights on the LaserPro Mercury II’s control panel are part of the system’s safety
interlock system.
•
DOOR
- The door light will illuminate when either the top lid or external pass through doors on
the LaserPro Mercury II are open or improperly closed.
•
POWER
- The power light will illuminate when the LaserPro Mercury II is powered on.
•
LASER
- The laser light will illuminate when the laser is active and in operation.
WARNING
•
DO NOT
attempt to remove or modify any component of the safety interlock
system.
•
If at any time, any of the access doors are open and the “laser” LED is
illuminated,
IMMEDIATELY
unplugs the laser system and contact GCC technical
support for service instructions.
•
DO NOT
operates the laser system if any component of the safety system is
LED Indicator Lights
LCD Display
Screen
Function Buttons
Directional and
Selection Buttons
Summary of Contents for Mercury II
Page 1: ......
Page 49: ... 48 Mercury II User Manual ...