LaserBit Giga Series 4.3 page
9
To meet the demands for every higher bandwidth,
Laserbit
Communications
continues to invest heavily in research and development with the newest product line
which offers Gigabit speeds being launched.
This manual describes the
Laserbit
LB
series of free space laser transmission
system.
The
Laserbit
LB
product range offers cost effective reliable free space laser
transmission for two Mbps up to 1000 Mbps data to the air, where a clean line of site
is available. It delivers the most effective point-to-point connection between
computer networks or telephone exchanges.
No need for installing cables, no rental costs, no licensing requirements.
Ideal for urban areas or city centres, where the use of these lines are expensive.
Suitable for factories or industrial environments where high noise level can interfere
with the transmitted data. The best choice to make a connection across rivers and
other natural or artificial obstacles, where cable is not available.
The transmission technique used in the
Laserbit
FSO
devices provides
transparent and wire-speed data transfer with virtually zero latency. Because they
use infrared light as the transmission medium,
Laserbit
system do not require
frequency licenses and the transmission is not effected by electro-magnetic or radio-
frequency interference. Basically the
Laserbit
link can be considered as a virtual
fibre in the air, which ends in real fibre optic cable at both ends.
Our product is built using high quality components for operation in even the most
adverse conditions.
Metal housing gives robust, waterproof environment for the electronics.
The shield protects the device from direct sunlight and provides extra air isolation.
The
Laserbit
LB
systems comprise two laser-heads and the two indoor
interconnection units (OIU) - one at each end. The interface connections are housed
in the outdoor unit together with the PSU of the system.
Best practises were employed in cost engineering throughout the development of
Laserbit
.
