LaserBit Giga Series 4.3 page
49
Warranty conditions
Laserbit
Communications Corp.
warrants that the
Laserbit
product
purchased will free from defects in material and workmanship for a period of one (1)
year from the date of purchase. This warranty period will not be extended by virtue
of a repair of the product or a replacement of any component of the product during
the warranty period.
This warranty covers only normal commercial use.
Laserbit
Communications
Corp.
is not responsible for warranty service should the
Laserbit
identification
marks, serial numbers or original seals be removed, altered, or broken, or should the
product fail to be properly maintained or fail to function properly as a result of any
modification, misuse, abuse, improper installation, neglect, improper shipping,
damage caused by disasters such as fire, flood, earthquake or lightning, improper
electrical current, or service other than by
Laserbit
Communications Corp.
or
its authorised partners.
If the
Laserbit
product fails to operate as warranted at any time during the
warranty period,
Laserbit
Communications Corp.
will repair, or at its option,
replace the defective product at no additional charge.
In no event will
Laserbit
Communications Corp.
be liable for any damages
including loss of data, lost profits, lost savings, lost business, or other incidental or
consequential or indirect damages arising out of the installation, use, maintenance,
performance, failure or interruption of the
Laserbit
product, even if
Laserbit
Communications Corp. has been advised of the possibility of such damage.
If you purchased the
Laserbit
product in the United States, some states do not
allow the limitation or exclusion of liability for incidental or consequential damages,
so the above limitation may not apply to you.
The purchaser or user shall have the responsibility to give
Laserbit
Communications Corp.
prompt written notice of any warranty claims. If the
product was purchased through an authorised partner of
Laserbit
Communications Corp.
, notice may be given in writing to that authorised
partner in the area in which the product was being used.
The product may be returned to
Laserbit
Communications Corp.
only if it has
a Return Material Authorisation (RMA) number. The product must be shipped
prepaid, insured and in the original shipping package or similar package for safe
shipment. The RMA number must be marked on the outside of the shipping
package. Any product returned without an RMA number shall be rejected.
Transportation charges for the return of the product will be paid by
Laserbit
Communications Corp.
if it is determined by
Laserbit
Communications
Corp.
that the product was defective within the terms of the warranty; otherwise the
