background image

LaserBit Giga Series 4.3                                          page     

16 

4  Product grouping by interface type 

 

4.1  Gigabit Ethernet Interface systems 

 

Laserbit

 

Giga

 products deliver ultra high bandwidth wireless connectivity that is 

unique to free space laser based systems. The applied technology is based on the 
highly successful Low-End series products designed to deliver easy-to-use and cost-
effective solution for high speed wireless connections featuring lightweight compact 
mechanical design. Giga systems provide Gigabit Ethernet wire speed full duplex 
data transfer require no adjustment or configuration on site, which makes the 
installation fast and easy. They can be ordered with IP based SNMP compatible 
device management that allows remote control and monitoring of the equipment.  

 

 

5  Product matrixes  

 

5.1  Power supply configuration 

 

 

230VAC 

110VAC 

230VAC/ 
Glass heater 

48VDC 

48VDC+ 
glass 
heater 

GigaPico 

;

 

;

 

;

 

;

 

;

 

GigaPinto 

;

 

;

 

;

 

;

 

;

 

GigaPronto 

;

 

;

 

;

 

;

 

;

 

 

 

Summary of Contents for GigaProduct Series
























































Reviews: