LaserBit Giga Series 4.3 page
36
Installing the ODIU box
The physical fixing of the ODIU box can be seen below.
Necessary toolkit:
•
Philips screwdriver
•
5mm wrench
•
Drilling machine with an Ø8mm bit (the minimum effective length is 50mm)
First you have to fix the ODIU box to the metal plate:
•
Pick the four M6x70 flat sphere headed screws, and take them to the holes
on the corners of the box
•
On the back of the box, where the screws came out, you have to put up the
four 6x40 spacers (these are the longer ones) to the legs of the screws
•
Pull on the metal plate to the legs of the screws
•
Fix the metal plate with four M5 nuts using the four washers, and four spring
washers like in the figure
Then you can fix the whole construction to a wall:
•
Drill four holes, using the metal plate for measuring the places of the bores,
with a Ø8mm bit. The depth of the bores have to be a minimum of 50mm
•
Put the four wall-plugs into the four holes
•
Put the four M4,5x70 cross
headed self-tapping-screws
through the four free holes of
the metal plate
•
Pull up the four 6x15 spacers
(the shorter ones) to the screws
•
Tight the screws into the wall-
plugs, and tight it up as strong
as possible for the appropriate
fastening
S
S
t
t
r
r
u
u
c
c
t
t
u
u
r
r
e
e
o
o
f
f
t
t
h
h
e
e
g
g
r
r
o
o
m
m
m
m
e
e
t
t
s
s
