Laser Technology TruPulse 200X, User Manual

Page: 43 / 62

Section 5 – Measurement Modes
Page 39
5.
Press-and-hold and aim to the top (or base)
of the target. The measured inclination appears
in the Main Display and is updated as long as
you continue to hold
. The measured
inclination is “locked” when you release .
The measured inclination appears briefly in the
Main Display and then the calculated Height is
displayed steady until you press any button or
the unit powers OFF.
 During the height routine:
•
Press or to re-shoot the previous point.
•
The laser is not active while measuring the ANG1 and ANG2
values. As long as you hold
, the inclination reading is
displayed and updated as your aiming point changes. The measured
inclination is based upon your aiming point when you release
.
•
When the height result is displayed, just press to start the
routine and repeat the steps.
Figure #31