Laser Technology TruPulse 200X, User Manual

Page: 14 / 62

Laser Technology, Inc. TruPulse 200X User's Manual 1
st
Edition
Page 10
Section 3 - Basic Operations
Battery
Installation
The TruPulse 200X is powered by a 3 Volt Lithium battery
commonly referred to as CR123A or also referred to as
CR123. The battery is located in the Battery Compartment
at the front of the instrument.
1. Remove the Battery Compartment Cover by lifting
up the Hinged Tab and turning counter clockwise,
2. Insert the battery negative end (-) first.
3. Re-insert the Battery Compartment Cover and use
the Hinged Tab to turn clockwise.
4. Press down on the Hinged Tab to secure.
 Note: To remove the battery, just reverse the
above instructions
Battery Voltage Level
The TruPulse 200X continuously monitors its power source. LTI has defined an
acceptable voltage range to ensure that the instrument has sufficient battery voltage to
guarantee correct operation.
Battery Icon
Appearance
Explanation
Battery Icon
not displayed
Battery is equal to or greater than 2.4 V.
Battery is greater than 2.1 V and less than
2.4 V.
Battery is greater than 2.0 V and less than
2.1 V.
Battery is below 2.0 V. The TruPulse 200X
will automatically power off.
Figure #5