Laser Technology TruPulse 200X, User Manual

Page: 26 / 62

Laser Technology, Inc. TruPulse 200X User's Manual 1
st
Edition
Page 22
Filter Mode
In this mode, the laser’s sensitivity is reduced to only detect pulses returned from a
reflector. The optional foliage filter is used in conjunction with this mode.
1.
Press until the FILt option is displayed.
2.
Press or to display the previous or next
Filter Mode option.
 oFF
 on
3.
Press to accept the Filter Mode option and return
to the Measurement screen.

If “on”, the Filter Mode indicator is illuminated and the
electronic filter is applied. The Foliage Filter must also be used
for proper target discrimination.

Typical maximum distance is 107 meters (350 feet) to a
7.5 cm (3 inch) prism.
 
Each time the TruPulse 200X is powered ON, it will return to the
same Filter Mode setting that was last used.

When Filter Mode is "on" and the Foliage Filter is in place, the
laser’s sensitivity is reduced so the laser only detects pulses
returned from a reflective target. This means that the TruPulse
will reject pulses from a non-reflective target.
Figure #14