IND-MD-TM-CS-TH-KT
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
7
of
21
If there is no video image in the main interface or only 1 video is displayed, it is necessary to enter the equipment
management interface for device search and addition. See section 4
"
Equipment Management" for details
.
2.2 “History” view and processing function
Click "view all history" button
，
and enter the history interface
, to view alarm history and deal
with them. Refer to “history” in section 3 for detailed description.
2.3 “NVR” Monitoring
This function is only for customer with optional NVR (Network Video Recorder). It can be ignored without NVR.
Adding heartbeat indicator lamp to connect with NVR on software system in order to keep the user well known
the status between NVR and software. As shown in the figure 2-4.
R
eal
tim
e
point
t
emperature
Figure 2-3 preview real time point temperature on main interface
Connect
he
artbeat
i
ndicat
or
lamp
wit
h
NVR
Figure 2-4 connect heartbeat indicator lamp with NVR
Before the network hard disk video recorder starts to record, the client software must enable the streaming service.
The detailed description of opening the streaming service is 4.2.4 "Other Settings" in this article. When the service is
off, the heartbeat light is gray. When the streaming service is enabled, the client software periodically detects the
communication status of the NVR. If the communication between the two parties is normal, the heartbeat light is
green, and the NVR is recording in real time. Once the heartbeat signal of the NVR is not detected, the
communication is considered to be interrupted, the heartbeat indicator light is flashing red, and the NVR is not
recording.
