12
EXCALIBUR LINER
English
F13
F14
F11
F12
F12
F15
WASHING OF THE NEW EQUIPMENT
•
The equipment has already been adjusted at our factory with
light mineral oil left inside the pumping group as protection.
Therefore, wash with diluent before sucking the product.
•
Lift the suction pipe and dip it into the solvent tank.
•
Clean the inside of the tank with a brush.
• Open the product output tap (
F14
).
• Pull the lever (
F11
) for the first cold start up (in position
CHOKE).
• Pull the start up cord (
F12
).
• Start the motor following the indications provided in the
chapter “
STARTING THE MOTOR
”.
• Press the switch (
F15
) of the equipment
“ON” (I)
.
•
Ensure the gun (
F13
) is without nozzle.
