xSenso User Guide
11
List of Tables
Table 3-4 Analog Input LEDs _______________________________________________________ 24
Table 3-5 Ethernet LEDs __________________________________________________________ 25
Table 4-4 Analog Input and Analog Output LEDs _______________________________________ 31
Table 4-5 Ethernet LEDs __________________________________________________________ 31
Table 5-4 Analog Input and Relay Output LEDs ________________________________________ 37
Table 5-5 Ethernet LEDs __________________________________________________________ 37
Table 7-3 Comparing xSenso Home Page and Device Status Page Information _______________ 45
Table 8-1 Network
Interface Settings _________________________________________________ 50
Table 8-2 Network 1 (eth0) Link Settings ______________________________________________ 52
Table 9-2 xSenso DAQ Command ___________________________________________________ 53
Table 9-3 DAQ Settings ___________________________________________________________ 54
Table 9-4 Analog Input Settings _____________________________________________________ 55
Table 9-5 Analog Output Settings ___________________________________________________ 56
Table 9-6 Relay Output Settings ____________________________________________________ 57
Table 10-2 Data Chart Settings _____________________________________________________ 60
Table 11-4 Data Logging Settings ___________________________________________________ 63
Table 13-1 xSenso Alarms and Reports ______________________________________________ 66
Table 13-2 Control Analog Output Settings ____________________________________________ 66
Table 13-3 Make Connection Settings ________________________________________________ 67
Table 13-4 Send Email Settings _____________________________________________________ 68
Table 13-5 FTP Put Settings _______________________________________________________ 69
Table 13-6 HTTP Post Settings _____________________________________________________ 70
Table 13-7 Control Relay Settings ___________________________________________________ 70
Table 13-8 SNMP Trap Settings ____________________________________________________ 71
Table 14-1 Tunnel Accept Mode Settings _____________________________________________ 73
Table 14-2 Modbus Settings _______________________________________________________ 75
Table 14-3 0xxxx Read/Write Coils (Function Codes 1, 5 and 15) __________________________ 75
Table 14-4 3xxxx Read Only Registers (Function Codes 4 and 23) _________________________ 76
Table 14-5 4xxxx Read/Write Holding Registers (Function Codes 3, 16 and 23) _______________ 76
Table 15-1 DNS Settings __________________________________________________________ 77
Table 15-2 FTP Settings __________________________________________________________ 78
Table 15-3 Syslog Settings ________________________________________________________ 78
Table 15-4 HTTP Settings _________________________________________________________ 79
Table 15-5 HTTP Authentication Settings _____________________________________________ 81
Table 15-6 RSS Settings __________________________________________________________ 81
Table 15-7 SNMP Settings _________________________________________________________ 82
