xSenso User Guide
66
13: Action Settings
Actions can be configured for alarms and reports available in the xSenso. Certain alarms and
reports are available in all the xSenso products whereas the output alarms are only available in the
xSenso 21A2 as seen in
Table 13-1 xSenso Alarms and Reports
below.
Alarms and Reports
Table 13-1 xSenso Alarms and Reports
Reference the appropriate action tables below for specific configuration settings for the alarms and
reports listed in
Table 13-1 xSenso Alarms and Reports
above:
Table 13-3 Make Connection Settings
Table 13-3 Make Connection Settings
Table 13-4 Send Email Settings
Table 13-5 FTP Put Settings
Table 13-6 HTTP Post Settings
Table 13-7 Control Relay SettingsT
Table 13-8 SNMP Trap Settings
Actions Available for Alarms and Reports
Table 13-2 Control Analog Output Settings
Note:
Control analog output settings are only available in the xSenso 21A2 and not
available for status reports or analog output alarms.
xSenso 2100
xSenso 21A2
xSenso 21R2
Terminal Block Power Alarm
Barrel Connector Power Alarm
Input 1 Alarm
Input 2 Alarm
Status Report 1
Status Report 2
Terminal Block Power Alarm
Barrel Connector Power Alarm
Input 1 Alarm
Input 2 Alarm
Status Report 1
Status Report 2
Output 1 Alarm
Output 2 Alarm
Terminal Block Power Alarm
Barrel Connector Power Alarm
Input 1 Alarm
Input 2 Alarm
Status Report 1
Status Report 2
Contol Analog Output
Settings
Description
Add an Action
(drop-down menu)
Select
Control Analog Output
for the alarm. The Output will appear.
