Lantronix WiBox, User Manual

Page: 66 / 74

Monitoring the Network
10 WiBox™ User Guide
Command Command Name Function
PI x.x.x.x
Ping Pings unit with IP address x.x.x.x to check device
status.
AT
ARP Table Shows the unit’s ARP table entries.
TT
TCP Connection
Table Shows all incoming and outgoing TCP connections.
NC
Network Connection Shows the unit’s current IP address.
RS
Reset Resets the unit.
QU
Quit Exits diagnostics mode.
G0, G1, ....,Ge, Gf
Get configuration
from memory page Gets a memory page of configuration information
from the device.
S0, S1,...,Se, Sf
Set configuration to
memory page Sets a memory page of configuration information
on the device.
Responses to some of the commands are given in Intel Hex format.
Note: Entering any of the commands listed above generates one of the
following command response codes:
Table 7-2. Command Response Codes
Response Meaning
0> OK; no error
1> No answer from remote device
2> Cannot reach remote device or no answer
8> Wrong parameter(s)
9> Invalid command