Configuration Using Web-Manager
WiBox™ User Guide
49
Figure 5-5. Channel Serial Settings
2. In the available fields, enter the following information:
Channel 1
Disable Serial Port
Available on Channel 1 settings only. When selected,
disables communication through the serial port.
Port Settings
Protocol
Select the protocol type from the pull down menu for the
selected channel.
Flow Control
Flow control manages data flow between devices in a network
to ensure it is processed efficiently. Too much data arriving
before a device is prepared to manage it causes lost or
retransmitted data.
Baud Rate
The unit and attached serial device, such as a modem, must
agree on a speed or baud rate to use for the serial connection.
Valid baud rates are 300, 600, 1200, 2400, 4800, 9600
(default), 19200, 38400, 57600, 115200, 230400, 460800, or
921600.
Data Bits
Indicates the number of bits in a transmitted data package.
Parity
Checks for the parity bit. The default is
None
.
Stop Bits
The stop bit follows the data and parity bits in serial
communication. It indicates the end of transmission.
Summary of Contents for WiBox
