7
1
1
:
:
U
U
s
s
i
i
n
n
g
g
T
T
h
h
i
i
s
s
G
G
u
u
i
i
d
d
e
e
Purpose and Audience
This guide provides the information needed to configure, use, and update the
UDS200 device server. It is for system administrators and those responsible for
installing and maintaining the UDS200.
Chapter Summary
The remaining chapters in this guide include:
2: Introduction
Describes the main features of the UDS200 and the
protocols it supports.
3: Getting Started
Provides information for installing your unit and getting it up
and running.
4: Configuring the UDS
Using Web Manager
Provides instructions for accessing Web Manager and using
it to configure settings for the UDS.
5: Configuring the UDS
Using Telnet or the Serial
Port
Provides instructions for accessing Setup Mode (command
line interface) using a Telnet connection through the
network or a terminal or terminal emulation program through
the serial port. Details the settings that you must configure.
6: Updating Firmware
Provides instructions for obtaining the latest firmware and
updating the UDS200.
7: Using Monitor Mode
Provides instructions for accessing and using the command
line interface to monitor the network and diagnose
problems.
8: Troubleshooting and
Technical Support
Describes common problems and error messages and how
to contact Lantronix Technical Support.
9: Technical Specifications
Lists technical specifications for the UDS200.
10: Connections and Pinouts
Provides descriptions and illustrations of connection
hardware.
A: Alternative Ways to
Assign an IP Address
Provides detailed information about using DHCP, AutoIP,
BOOTP ARP, and Telnet to assign an IP address.
B: Binary to Hexadecimal
Provides instructions on converting binary values to
hexadecimals and tables listing all configuration options in
hexadecimal notation.