Lantronix
SM24TBT2DPA Install Guide
33737 Rev. L
Page
9
of
38
Layer 3 Switching
Ipv4 Static Routing
Ipv4 Unicast: Static routing
Ipv6 Static Routing
Ipv6 Unicast: Static routing
Security
Secure Shell (SSH)
SSH secures Telnet traffic in or out of the switch; SSH v1 and v2 are supported
Secure Sockets Layer
(SSL)
SSL encrypts the http traffic, allowing advanced secure access to the browser-based
management GUI in the switch
IEEE 802.1X
IEEE802.1X: RADIUS authentication, authorization and accounting, MD5 hash,
guest VLAN, single/multiple host mode and single/multiple sessions
Supports IGMP-RADIUS based 802.1X
Dynamic VLAN assignment
Layer 2 Isolation
Private VLAN Edge
PVE (also known as protected ports) provides L2 isolation between clients in the same
VLAN. Supports multiple uplinks
Port Security
Locks MAC addresses to ports, and limits the number of learned MAC address
IP Source Guard
Prevents illegal IP address from accessing to specific port in the switch
RADIUS/
Supports RADIUS and authentication. Switch as a client.
Storm Control
Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast
storm on a port
DHCP Snooping
A feature acts as a firewall between untrusted hosts and trusted DHCP servers
ACLs
Supports up to 256 entries. Drop or rate limitation based on:
•
Source and destination MAC, VLAN ID or IP address, protocol, port,
•
Differentiated services code point (DSCP) / IP precedence
•
TCP/ UDP source and destination ports
•
802.1p priority
•
Ethernet type
•
Internet Control Message Protocol (ICMP) packets
•
TCP flag
Quality of Service (QoS)
Hardware Queue
Supports 8 hardware queues
Scheduling
Strict priority and weighted round-robin (WRR)
Queue assignment based on DSCP and class of service
Classification
Port based
802.1p VLAN priority based
Ipv4/Ipv6 precedence / DSCP based
Differentiated Services (DiffServ)
Classification and re-marking ACLs
Rate Limiting
Ingress policer
