Lantronix
SM24TBT2DPA Install Guide
33737 Rev. L
Page
14
of
38
Mode/Reset Button
Pressing the front panel
Mode/Reset
button for a period of time lets you
perform these tasks:
•
Change Port Status LED Mode
: to read the port status correctly in the two
different modes (Link/Act/Speed mode or PoE mode).
•
Reset the Switch
: to reboot and get the switch back to the previous
configuration settings saved. Note that there is also a
Non-Stop PoE (soft
reboot)
feature allows the switch to reboot without affecting PoE port
power via the Web UI or CLI.
•
Restore the Switch to Factory Defaults
: to restore the original factory default settings back to the switch.
Note
: Use the table below to determine which task is being performed by reading the LED behaviors while
pressing and holding the Mode/Reset button. When the LED behavior displays correctly, release the button.
Table 4: Mode/Reset Button Descriptions
Task to Perform
Press Button for
SYS LED Behavior
Port Status LED Behavior
Change LED Mode
0 ~ 2 seconds
ON Green
LED status will change based on the mode
selected.
Reset the Switch
2 ~ 7 seconds
Blinking Green
ALL LEDs Off.
Restore to Defaults 7 ~ 12 seconds
Blinking Green
ALL LEDs stay On.
Back Panel
The back panel provides for dual hot-swappable 1560W power supplies for powering the switch. The switch ships
with one power supply (820 Watts) standard; order the secondary power supply module for the maximum power
(1640 Watts).
Regional Versions of Power Cords
These regional versions of the power cords and power supplies are available: -NA = North America, -LA = Latin
America, -EU = Europe, -UK = United Kingdom, -SA = South Africa, -JP = Japan, -OZ = Australia, and -BR = Brazil.
