Lantronix
SM24TBT2DPA Install Guide
33737 Rev. L
Page
25
of
38
If your PC is configured correctly, the switch Login page displays as shown below.
If you do not see the above login page, try these steps:
-
Refresh the web page.
-
Check to see if there is an IP address conflict.
-
Clean browser cookies and temporary internet files.
-
Check your PC settings again and repeat step 2.
6.
Enter the factory default username (
admin
) and password (
admin
) on login page.
7.
Click “Login” to log into the switch. See the
Web User Guide
for additional information.
Initial Switch Configuration via CLI
Use an RJ-45 cable to connect a terminal or PC/terminal emulator to the switch port to access the CLI.
Attach the RJ-45 serial port on the switch front panel to the cable for Telnet/CLI configuration.
Attach the other end of the DB-9 cable to a PC running Telnet or a terminal emulation program such as
HyperTerminal or TeraTerm.
After powering up the switch for the first time, you can perform the initial switch configuration using the CLI
(Command Line Interface). For managing other switch features, see the
CLI Reference
for details.