Lantronix
SM24TBT2DPA Install Guide
33737 Rev. L
Page
11
of
38
Other Management
HTTP/HTTPs; SSH
DHCP Client/ DHCPv6 Client
Cable Diagnostics
Ping
Syslog
Telnet Client
IPv6 Management
Power over Ethernet (PoE)
Port Configuration
Supports per-port PoE configuration function
PoE Scheduling
Supports per port PoE scheduling to turn on/off the PoE devices (PDs)
Auto Power Reset
Checks the link status of PDs and reboots PDs if there are no responses
Power Delay
The switch provides power to the PDs based on configurable delay time when PoE
switch boots up, in order to protect switch from misuse of the PDs
Always on PoE
Lets you restart device, upload software, or swap active and alternate (backup)
firmware images while retaining PoE power to PDs. Note: It will take 75 - 80 seconds
to have PoE++ power on the ports to power PDs again if the switch makes a cold
restart. "Always on PoE" has no effect on this time.
Front Panel
The SM24TBT2DPA front panel LEDs, ports and buttons are shown and described below.
