SCSxx05/SCSxx20 User Guide
4: Configuration
4-10
1. Select
Yes
to disable buffering, or select
No
(default) to enable buffering.
2. Press
Enter
. You have two options:
To go back and change any of your settings for this port or group of
ports, select the
Setup the Device parameters
option,
or
When you are satisfied with the changes you have made, or you wish to
administer additional ports, select
Done
.
3. Press
Enter.
If you selected
Done
, you now confirm your changes.
Confirm Changes
1. To commit your changes to flash memory
now
:
a) Select
Yes
. You cannot undo this group of device parameter changes
after this point. (If you select
No
, you return to the previous screens to
make changes.)
b) Press
Enter
. There is a short delay while the system saves the changes
to flash memory. After the changes are confirmed, the system offers the
ability to configure a different port or group of ports.
2. You have two options:
To repeat the process of setting device port parameters, select
Yes
,
or
To move on to the next option,
Device Logging
, select
No
.
3. Press
Enter
. If you selected
No
, the Configure Device Port menu returns
with
Device Logging Parameters
selected.
Device Logging Parameters
You can configure logging parameters on individual ports or on
ad hoc
groups of
ports.
Device logging parameters include:
File logging (default is disabled)
Syslog logging (default is disabled)
Email logging (default is disabled)
1. Define the port or group of ports. (See
Define a Group of Ports to Configure
on page 4-7.)
2. Select
Device Logging Parameters
from the Configure Device Port menu.
3. Press
Enter
. The Device Logging Parameters menu displays, with
File
Logging Port
selected.
Summary of Contents for SCSxx05
