Lantronix SCSxx05, User Manual

Page: 42 / 141

SCSxx05/SCSxx20 User Guide 4: Configuration
4-2
Topic Page
Configuring Device Ports 4-5
Updating Software 4-14
Using Done 4-16
Saving 4-17
Rebooting 4-17
Connecting Using Telnet or Your Serial Terminal
If you are
not
already connected as described in Quick Start, you have two
options:
‹
Connect the terminal port to a VT100 terminal device or computer using
a VT100 terminal emulation program. (See
Connecting a Terminal.)
‹
Telnet via your network connection.
Your screen displays the SCS name and a login prompt after power-up.
Logging in as System Administrator
If you are
not
already logged in as described in Quick Start, follow these steps:
1. Type sysadmin (a predefined user with special privileges) and press Enter .
The Password prompt displays.
SCS4805 login: sysadmin
Password:
sysadmin>
2. Type your password and press Enter . The default password is PASS . (The
password does not display when you type it.) If this is the first time you have
logged in as the system administrator, the setup (configuration) screen
displays.
Accessing the Setup Menu
The following screen displays when the setup program starts, whether
automatically (the first time the sysadmin logs in) or when the system
administrator enters the
setup command after logging in.
1. If this is
not
the first time you have logged in, type setup and press Enter .