SCS100/200/400 User Guide
5:
Installation
6.
Type
root
in the
Username
field and
system
(default privileged password) in the
Password
field. (If a “remember password” popup window displays, select
No
and
re-enter the password if necessary.)
7.
Click the
Login
button. The desired configuration page displays.
Note:
For added security, change the login and privileged passwords from their
default settings. You can set both passwords in the Server section of the web
pages.
Web Browser Method
To launch the web browser interface outside of EZWebCon, open a standard browser
and enter the SCS's IP address (for example, http://172.19.21.215) or resolvable text
name into the URL/Location field. Follow the login process starting with step 3 in
EZWebCon Method, above.
Telnet Login Method
Standard Telnet connections are not encrypted and pose a security risk. Incoming Telnet
and SSH (Secure Shell) are enabled by default to allow TCP/IP connections.
To form a Telnet connection to the SCS:
1.
Enter the
Telnet
command followed by the SCS's IP address, a space, and
7000
.
2.
Enter the login password. The default login password is
access
. Until authentication
is configured and users are added, any username works.
Forming a Telnet Connection
%telnet 192.0.1.88 7000
#access (not echoed)
Lantronix SCS Version n.n/n (yymmdd)
Type Help at the ‘Local>’ prompt for
assistance.
Enter Username>
Command Line Method
To monitor or configure the SCS via a terminal, attach a terminal to the serial (console
port) and press
Enter
. You see a
Local>
prompt at which you can enter configuration
commands. See the
SCS Reference Manual
for a complete list of available commands.
Note:
For overall help, type and enter Help in a command line. For information regarding
a specific command, type and enter Help <command>. For information regarding a
command you do not fully know, type and enter the partial command followed by a
question mark as follows: Help <xxx?>.
.
5-9
