Lantronix MSS, Reference Manual

Page: 47 / 93

Command Reference Change Password Incoming
2-37
2.42 Change Password Incoming
Controls whether the MSS will ask users for an incoming password when they attempt to connect to the
network socket connection ports (ports 200x and 300x, where x is the number of the desired serial port). See
Environment Strings on page B-1 for more information on network socket connections.
Restrictions Requires privileged user status
Parameters Port
MSS4 only. Specifies a particular port or group of ports.
Note:
In the absence of the PortList parameter, the configuration will affect the MSS4’s
current port only.
PortList
Specify a particular port or group of ports. Port numbers are specified with
integers between 1 and 4, and should be separated with commas (for lists) or
dashes (for ranges).
2.43 Change Password Limit
Limits the number of failures allowed when entering the privileged password, with the Set Privileged
command, to become the privileged user. After the specified number of retries, the port will be logged out.
The Change Privpass command is used to set the privileged password.
Restrictions Requires privileged user status.
Parameters Server
MSS4 only.
number
Enter a value between 0 (no limit) and 100.
Defaults 3
CHANGE PORT PortList PASSWORD INCOMING
DISABLED
ENABLED
 
 
 
CHANGE SERVER
[ ]
PASSWORD LIMIT
number