Lantronix MPS100, User Manual

Page: 60 / 78

MPS/LPS User Guide D: Updating Software
D-4
Figure 23: Configuring NetWare Reload
Local> SET PRIVILEGED
Password> SYSTEM (not echoed)
Local>> DEFINE SERVER NETWARE LOADHOST fileserver
Local>> DEFINE SERVER SOFTWARE
SYS:\LOGIN\MPS.100SYS
Local>> INITIALIZE RELOAD
MOP
The
MPS100.SYS
filename is the only parameter that the MPS
needs to reload via MOP. Make sure the service characteristic is
enabled on the host’s Ethernet circuit, copy the
MPS100.SYS
file to
the
MOM$LOAD
directory, and reload the MPS using the
Initialize Reload
command. Be sure to use binary mode for
the file transfer.
Troubleshooting Flash ROM Updates
Many of the problems that occur when updating the Flash ROM can
be solved by completing the following steps:
Table 16: Flash ROM Troubleshooting
Protocol Area to Check
NetWare Ensure the file is in the login directory. Since MPS cannot
log into the file server, it has limited access to server
directories.
TFTP Check the file and directory permissions.
Be sure the loadhost name and address are specified
correctly and that their case matches that of the filenames
on the host system.
Be sure the file and pathnames are enclosed in quotes to
preserve case.
Be sure TFTP is enabled on the host; several major UNIX
vendors ship their systems with TFTP disabled by default.