Lantronix MPS100, User Manual

Page: 32 / 78

MPS/LPS User Guide 4: TCP/IP Configuration
4-10
LPR on HP Hosts
The System Administration Manager (SAM) allows you to create
print queues.
Note: If you are unable to use SAM, the Print Server Reference
Manual located on the CD-ROM describes UNIX commands that
can be used to set up print queues.
Note: Printer names on HP hosts are limited to 13 characters. The
MPS text service name will be too long, so you will have to rename
the MPS.
To create a print queue:
1.
At the HP prompt, type sam .
2.
From the main application window, choose Printers and
Plotters .
3.
In the Printers and Plotters window, choose Printers/Plotters .
4.
In the pull-down menu, select Remote Printer/Plotter from the
Actions menu.
5.
The Add Remote Printer window will appear. SAM will prompt
you for:
‹
The printer name (the name of the print queue),
‹
The remote system name (the MPS name),
‹
The remote printer name (the MPS service)
‹
The remote cancel model, and
‹
The remote status model.
LPR on SCO UNIX Hosts
LPR is supported in SCO V3.2 release 4 with TCP/IP Version 1.2
and greater.
To configure a print queue using LPR, issue the
mkdev rlp
command. This will install the Berkeley remote printing files and
executable programs.
Note: The
mkdev rlp
command should only be issued once, or
serious problems will occur. If this happens, contact SCO technical
support.