Lantronix I/O 2100 Page 15 User Manual Download

Page: 15 / 190

1: Preface

IntelliBox-I/O 2100 User Guide

Chapter

Description

13: EventTrak

Instructions for setting up EventTrak to monitor for, take
actions in response to, and notify of events that occur on
the attached device.

14: Updating Firmware

Instructions for upgrading the IntelliBox firmware.

A: Factory Default Configuration

Quick reference of the IntelliBox factory-default
configuration settings.

B: Networking and Security

In-depth description of networking and network security
as it relates to the IntelliBox device servers.

C: Modbus

Explanation and examples of the advantages of using
Modbus/TCP with the IntelliBox.

D: Technical Specification

Table of technical data about the products.

E: Isolated I/O Specifications

Table of technical data about the digital I/Os and relay.

F:State Diagram Template

Provides a template for planning EventTrak settings.

G:Technical Support

Information about contacting Lantronix Technical
Support.

H: Compliance

Information about the product's compliance with
regulatory standards.

I: Warranty

Information about the product’s warranty.

Additional Documentation

Visit the Lantronix Web site at

www.lantronix.com/support/documentation

for the latest

documentation and the following additional documentation.

Document

Description

IntelliBox-I/O 2100
Device Server Quick
Start Guide

Provides the steps for getting the IntelliBox up and running.

IntelliBox-I/O 2100
Device Server
Command Reference

Describes how to configure the IntelliBox using Telnet or the serial
port and summarizes the CLI and XML configuration commands.

Secure Com Port
Redirector
User Guide

Provides information for using the Lantronix Windows-based utility to
create secure virtual com ports.

Note:

For detailed application examples, please go to the Lantroix web site.

Summary of Contents for I/O 2100































































































































































































Search results

Summary of Contents for I/O 2100

Reviews:

Related manuals for I/O 2100

Brands by name

Popular brands

Lantronix I/O 2100, User Manual

Search results

Summary of Contents for I/O 2100

Reviews:

Related manuals for I/O 2100

Brands by name

Popular brands