LP-1540ai ● User Guide ● ●
09
www.lanpro.com
▫
From the LAN port of the LP-1540ai to the PoE Injector’s PoE
port.
▫
From the LAN port of the PoE injector to the switch in the internal
LAN or to the Ethernet port of the PC or equipment to which the
service will be delivered.
▫
WAN port of the LP-1540ai to the Swiche or DSL Internet service
provides
Figure 4.
This equipment cannot be powered via the two
methods at the same time.
IMPORTANT WARNING:
1.3
Mounting the equipment on the selected location
●
Outdoors:
▪
Place the equipment with the connectors are located in the lower
part of the equipment so there is no water return that could
damage the equipment.
▪
It must be fixed to a mast or to a wall, depending on your needs.
▪
Use the connectors to be used in outdoors.
Once the cabling is setup and certified the equipment
can be connected.
For both mounting methods, please take in mind the RF coverage
as per your needs, depending on the integrated antenna aperture.
IMPORTANT NOTE:
●
Indoors:
▪
It must be fixed to a mast or to a wall, depending on your needs.
