Lanier LD225, Network Manual

Page: 88 / 150

Monitoring and Configuring the Printer
82
4
• If SmartDeviceMonitor for Client
cannot access the network printer
and times out, it will stop sending
the print job. In this case, you
should cancel the paused status
from the print queue window.
SmartDeviceMonitor for Client
will resume access to the network
printer. You can delete the print
job from the print queue window,
but canceling a print job printed by
the network printer might cause
the next job sent from another user
to be incorrectly printed.
• If a print job sent from SmartDe-
viceMonitor for Client is interrupt-
ed and the network printer cancels
the job because something went
wrong, send the print job again.
• Print jobs sent from another compu-
ter do not appear in the print queue
window, regardless of protocol.
• If various users send print jobs us-
ing SmartDeviceMonitor for Client
to network printers, the printing
order might not be the same as that
in which the jobs were sent.
• An IP address cannot be used for
the IPP port name because the IP
address is used for the SmartDe-
viceMonitor for Client port name.
• When setting SSL, a protocol for
encrypted communication, under
environment which server authen-
t i c a t i o n i s i s s u e d , e n t e r " h t -
tps://(machine's address)/".
Internet Explorer must be installed
on your computer. Use the highest
version. Internet Explorer 6.0 or
higher is recommended.
• If the [ Security Alert ] dialog box ap-
pears when accessing the machine
using IPP to create or configure an
IPP port, or when printing, install
the certificate. To select the certifi-
cate store location when using Cer-
tificate Import Wizard, click
[ Place all
certificates in the following store ] , and
then click [ Local Computer ] under
[ Trusted Root Certification Authorities ] .
Note
❒
For details about SSL settings,
consult your network adminis-
trator.