Lanier LD225, Network Manual

Page: 64 / 150

Using a Printer Server
58
3
Important
❒
When creating a queued print server
in a pure IP environment of Net-
Ware 5 / 5.1 or NetWare 6 / 6.5, cre-
ate a print queue on the file server
using NetWare Administrator.
❒
This printer is not available as a re-
mote printer for use in a pure IP
environment.
❒
To use the printer in a pure IP en-
vironment, set it to TCP/IP.
Setting up using NIB Setup Tool (TCP/IP)
A
Log on to the file server as an ad-
ministrator or administrator
equivalent.
B
Start NIB Setup Tool from the
[ Start ] menu.
C
Click [ Property Sheet ] , and then
click [ OK ] .
D
Select the printer you want to con-
figure, and then click
[ Finish ] .
A dialog box prompting you to
perform the remaining configura-
tion tasks in the Web browser ap-
pears. Click
[ OK ] , and then wait
until Web Image Monitor starts au-
tomatically.
E
A dialog box for entering the [ User
Name ]
and
[ Password ]
appears.
Enter the user name and pass-
word, and then click
[ OK ]
.
Note
❒
For details about the password,
consult your network adminis-
trator.
F
Click [ Configuration ] in the left ar-
ea, click [ Network ] , and then click
[ NetWare ] .
Note
❒
For details , see p.53 “Setting Up
as a Print Server (NetWare
3.x)”.
G
Confirm the settings, and then
click
[ Apply ]
.
Configuration is now complete.
Wait several minutes before re-
starting Web Image Monitor.
Setting up using NIB Setup Tool (IPX)
A
Log on to the file server as an ad-
ministrator or administrator
equivalent.
B
Start NIB Setup Tool on the [ Start ]
menu.
C
Click [ Property Sheet ] , and then
click
[ OK ]
.
D
Select a printer you want to con-
figure.
E
On the [ NetWare ] tab, Select [ File
Server Mode ]
or
[ NDS mode ]
in the
[ Logon Mode ] area.
When
[ File Server Mode ]
is selected,
the network connection is estab-
lished based on the string entered
in the
[ File Server Name(F): ] box.
When [ NDS mode ] is selected, the
network connection is established
based on the string entered in the
[ NDS Tree ] box.
F
In the [ Print Server Name: ] box, en-
ter the name of the print server.
G
In the [ File Server Name: ] box, enter
the name of the file server in
which a print server is created.
You can also click [ Browse... ] to
browse through available file serv-
ers.