Lanier LD225, Network Manual

Page: 89 / 150

Printer Status Notification by E-Mail
83
4
Printer Status Notification by E-Mail
Whenever a paper tray becomes emp-
ty or paper is jammed, an e-mail alert
is issued to the registered addresses
to notify the printer status.
For this notification, you can make
the e-mail notification settings.
Notification timing and e-mail con-
tent can be set.
You can be notified of the following
events:
• Service call.
• Toner cartridge is empty.
• Toner cartridge is nearly empty.
• Photoconductor unit needs replacing.
• Photoconductor unit will need re-
placing soon.
• Waste toner bottle is full.
• Waste toner bottle is nearly full.
• Stapler has no staples.
• Punch dust is full
• Paper has jammed.
• Open door is detected.
• The paper tray is empty.
• A paper tray error occurred.
• Output paper tray is full.
• Unit connection error.
• Duplex unit error.
• Hard disk drive is full.
Note
❒
When the service call is set, foll-
wing call results can be sent.
• Failure automatic call success
• Failure automatic call out of time
• Failure automatic call failure
• Consumable automatic call
success
• Consumable automatic call
success
• Remote machine check failure
• Firmware update confirmed
❒
Other call results can be dis-
played, depending on the ma-
chine type.
❒
For details about the service call,
contact your service or sales rep-
resentative.
A
Open a Web browser, and then
e n t e r “ h t t p : / / ( m a c h i n e ' s a d -
dress)/” in the address bar.
Top Page of Web Image Monitor
appears.
When setting SSL, a protocol for
encrypted communication, under
environment which server authen-
tication is issued , enter “ht-
tps://(machine's address)/”.
B
Click [ Login ] on Top Page of Web
Image Monitor.
The dialog box for entering the
user name and password appears.
C
Enter the user name and pass-
word, and then click
[ OK ] .
For details about the user name
and password, consult your net-
work administrator.
D
In the menu area, click [ Configura-
tion ] .
E
Click [ Device Settings ] , and then
click [ E-mail ] .
F
Make the following settings:
• Items in the Reception column:
Make the necessary settings for
sending and receiving e-mail.