Lanier GX3050 User Manual Download Page 95

Page: 95 / 265

Troubleshooting

6. Reinstall the duplex unit in its original position, and then lower the levers on its sides.

7. Lock the lever for attaching the duplex unit.

Printing starts.

Depending on how the paper was jammed, printing may resume from the next page, not the one jammed.

p.84 "Paper Is Not Fed or Delivered Normally"

p.20 "Detaching and Reattaching the Multi Bypass Tray (Optional)"

Removing Paper Jammed in the Duplex Unit

Follow the procedure below to remove paper jammed in the duplex unit.

If the multi bypass tray is attached to the printer, detach it.

1. Press the duplex unit cover button at the centre of the bypass tray, and then open the duplex unit

cover.

Summary of Contents for GX3050









































































































































































































































































Search results

Summary of Contents for GX3050

Reviews:

Brands by name

Popular brands

Lanier GX3050, User Manual

Search results

Summary of Contents for GX3050

Reviews:

Brands by name

Popular brands