Lanier GX3050, User Manual

Page: 66 / 265

63
Making Printer Settings
Default: 8 1/2 x 11
Copies
Specify the number of pages to print.
This setting is disabled if the number of pages to print is specified by the printer driver.
z
1-999
Edge-Edge Print
Specify whether to print on the paper as fully as possible.
z
Off
z
On
Default: Off
Duplex
Specify whether or not to print on both sides of a sheet.
z
Off
z
Short Edge Bind
z
Long Edge Bind
Default: Off
Blank Pages
Specify whether or not to print blank pages.
z
Print
z
Do not Print
Default: Print
Tray Switching
You can set to switch the paper tray.
z
Off
z
On
Default: Off
Uni-direct.Prt.
Specify whether to print unidirectionally or bidirectionally.
Unidirectional printing produces higher quality print, but bidirectional printing is faster.
z
Env.Selector:On
Printing is done unidirectionally or bidirectionally according to the envelope selector position.
If the envelope selector is set to the rear position , printing is done unidirectionally.
If the envelope selector is set to the forward position , printing is done unidirectionally or bidirection-
ally according to the paper type.
z
Auto Detect
Printing is done unidirectionally or bidirectionally according to the paper type, regardless of the enve-
lope selector position.
z
Always
Printing is always done unidirectionally, regardless of the envelope selector position.
Default: Env.Selector:On