Landoll 850 FINISHOLL Series, Operator'S Manual

Page: 69 / 92

3-12 LEVELING ASSEMBLY INSTALLATION
IMPORTANT
SEE FIGURE 3-26 FOR PART NAMES.
3-12.1 Install the spring bushing in the pivot
block.
3-12.2 Lightly coat the threads of the 1"-8 X 4
screws with loctite. Use the screws, flat
washers and
lockwashers to secure the
pivot block bushings and the pivot block be-
tween the arms extending from the gauge
wheel rockshaft.
3-12.3 Assemble the pivot bracket on the front
bolt and bushing in the mast with the short
arm up and forward as per decal on bracket.
Failure to do so will cause damage.
3-12.4 Slide a leveling spring onto the
threaded end of the leveling rod.
3-12.5 Slide the leveling rod into the pivot
block and pin to the pivot bracket with a pin
and 3/8-16 X 3-1/2 screw and lock nut.
3-12.6 Install a washer, leveling spring,
washer, nut and jam nut on the leveling rod.
Thread the nut completely onto the leveling
rod and lock with a jam nut.
3-12.7 Install the radius rod between the pull
hitch and the upper end of the pivot bracket
with pins, cotter pins and a 3/8-16 X 3-1/2
screw and lock nut.
3-33