3-10 COULTER ASSEMBLY, 855 SERIES
IMPORTANT
SEE FIGURE 3-24 FOR PART NAMES.
3-10.1
Roll one of the coulter gangs under the
front of the frame. Refer to the drawing
which came with your machine for location of
different length coulter gangs. Position coul-
ter gang with arm to align with bracket on
frame.
IMPORTANT
WHEN DISC GANGS ARE POSITIONED COR-
RECTLY
THE
BEARING
GREASE
ZERKS
WILL BE POINTING TO THE REAR.
3-10.2
Install disc gangs to frame and wings
using bearing blocks, 5/8-11 X 8-1/2 screws,
shims, washers, and nuts. Install the bearing
half with the grease zerk in the side on top of
the rockshaft.
3-10.3
If manually adjusted install ratchet jacks
to anchor on frame or wing and to arm on
disc rockshafts using pins and cotter pins.
(See Figure 3-20)
.
3-10.4
If hydraulically adjusted 17' - 35' mod-
els, install cylinders per
Figures 3-22 and
3-23.
a.
Install the master cylinder on the left wing.
Pin the base end of the cylinder to the bracket
on the wing and the rod end to the arm on the
disc rockshaft.
b.
Install the slave 1 cylinder on the right wing.
Pin the base end of the cylinder to the bracket
on the wing and the rod end to the arm on the
disc rockshaft.
c.
Install the slave 2 cylinder on the right side
of the main frame. Pin the base end of the
cylinder to the bracket on the frame and the
rod end to the arm on the disc rockshaft.
d.
Install the slave 3 cylinder on the left side of
the main frame. Pin the base end of the cylin-
der to the bracket on the frame and the rod
end to the arm on the disc rockshaft.
e.
With the cylinders fully extended, adjust the
screw adjust on the wing disc rockshafts until
the wing discs are to the same depth below
the frame as the discs on the main frame.
f.
Install a 90° elbow in the ports of each cylin-
der.
g.
Install hoses as shown on the shank place-
ment drawing for your size of machine.
3-10.5
Install depth gauge as shown in
Figure
3-21.
IMPORTANT
DEPTH GAUGE SHOULD BE MOUNTED ON
INSIDE BEARING BLOCK ON MAIN FRAME.
3-30
Summary of Contents for 850 FINISHOLL Series
