Landoll 850 FINISHOLL Series, Operator'S Manual

Page: 45 / 92

3-5 ROCKSHAFT INSTALLATION, WINGS
3-5.1 To install the gauge wheel clamp on 17’
units, fasten the gauge wheel clamp to the
outer tube of the wing using U-bolts and nuts
provided. Slide spindle assembly into place
and pin at desired depth
(See Figure 3-7) .
3-5.2 Install short rockshafts on wings using
bearing blocks, 5/8-11 X 8-1/2 screws, wash-
ers, shims and lock nuts. Install the bearing
half with the grease zerk in the side on top
of the rockshaft. Use only enough shims be-
tween bearing halves to allow rockshaft to
rotate without binding
(See Figure 3-8) .
IMPORTANT
ON 19’ UNITS POSITION GAUGE WHEELS
WITH SPINDLE POINTING OUTWARD. ON 22’
UNITS
POSITION GAUGE WHEELS WITH
SPINDLE POINTING INWARD. 25’ AND
LARGER UNITS USE WALKING BEAMS.
3-5.3 Mount tires on the wheels and install on
hubs.
Recommended tires:
17’ wings
7.60 X 15 6 ply
19’ through 41’ wings 9.5L X 15 8 ply
3-9
Figure 3-7 Gauge Wheel Installation
Figure 3-8 Rockshaft Installation, Wings