4
OPERATION AND MAINTENANCE
The Model 1230 Series Coulter Chisel is a
highly versatile primary tillage tool, adaptable to
spring or fall tillage operations. Rigid-frame models
are available in cutting widths from 7’ to 18
1
2
’ with
12" or 15" shank spacing. Folding-frame models
include 19,’ 21’ and 23’ cutting widths with 12"
shank spacing.
When equipped with concave disc cutters and
twisted shovels with 12" shank spacing, the 1230
Series aggressively buries residue. When equipped
with rippled disc coulters and straight points with
15" shank spacing, the implement leaves residue
on top for conservation tillage.
Options include a leveling bar for follow-up
planting and deep-till shanks for breaking up
compacted soil.
This manual was prepared from the latest
product information available at publication time.
The Company reserves the right to make changes
at any time without notice.
CAUTION
1. AVOID INJURY OR FATAL ACCI-
DENTS. READ THESE SAFETY PRE-
CAUTIONS COMPLETELY AND CARE-
FULLY! UTILIZE THESE INSTRUC-
TIONS WHEN OPERATING YOUR MA-
CHINE.
2. THE OPERATOR SHOULD BE A RE-
SPONSIBLE ADULT FAMILIAR WITH
FARM MACHINERY AND TRAINED IN
THIS MACHINE’S OPERATIONS. DO
NOT ALLOW PERSONS TO OPERATE
THIS MACHINE UNTIL THEY HAVE
READ THIS MANUAL AND HAVE DE-
VELOPED A THOROUGH UNDER-
STANDING OF THE SAFETY PRECAU-
TIONS AND OF HOW THE MACHINE
WORKS.
3. TO PREVENT INJURY OR DEATH,
USE A TRACTOR EQUIPPED WITH A
ROLL-OVER PROTECTION STRUC-
TURE (ROPS) AND SEAT BELT. DO
NOT PAINT OVER, REMOVE OR DE-
FACE ANY SAFETY DECALS ON YOUR
EQUIPMENT. OBSERVE ALL SAFETY
DECALS AND FOLLOW THE INSTRUC-
TIONS ON THEM.
4. REMEMBER! YOUR BEST INSUR-
ANCE IS A CAREFUL AND RESPONSI-
BLE OPERATOR. IF THERE IS ANY
PORTION OF THIS MANUAL OR OF
THE MACHINE’S OPERATION YOU DO
NOT UNDERSTAND, CONTACT YOUR
LOCAL AUTHORIZED LANDOLL
DEALER, OR LANDOLL CORPORA-
TION.
4-1
Summary of Contents for 1230 Series
