Landoll 1230 Series, Operator'S Manual

Page: 9 / 64

2 STANDARD SPECIFICATIONS
MODEL TYPE
OF
FOLD
WORKING
WIDTH
NO. OF
SHANKS
TOTAL/REAR
NO. OF
CUTTERS
TRANS.
WIDTH
TRANS.
HEIGHT
12317 Rigid 7’-0” 7/3 6 9’-8” 6’-3”
12337 Rigid 8’-7” 7/3 6 9’-8” 6’-3”
12319 Rigid 9’-0” 9/3 8 9’-8” 6’-3”
12339 Rigid 11’-1” 9/5* 8 10’-9” 6’-3”
123111 Rigid
11’-0” 11/3 10 10’-9” 6’-3”
123311 Rigid
13’-9” 11/6 10 15’-7” 6’-3”
123113 Rigid
13’-0” 13/5* 12 12’-9” 6’-3”
123213 Rigid 13’-0” 13/5 12 15’-7” 6’-3”
123313 Rigid 16’-3” 13/6 12 15’-7” 6’-3”
123215 Rigid 15’-0” 15/5 14 15’-7” 6’-3”
123315 Rigid 18’-6” 15/8* 14 17’-7” 6’-3”
123217 Rigid 17’-0” 17/5 16 16’-10” 6’-3”
123419 Flat Fold 19’-0” 19/7 18 13’-11” 9’-0”
123421 Flat Fold
21’-0” 21/7 20 13’-11” 9’-0”
123423 Flat Fold
23’-0” 23/7 22 13’-11” 9’-0”
* 2 Standard Shanks on Rear Extensions
IMPORTANT! Deep till shanks are for installation on rear frame of rigid models only. do not install on
frame extensions.
2-1