Landis+Gyr ZMQ202, User Manual

Page: 78 / 88

Gyr H 71 0200 0215 f en - ZMQ202 / ZFQ202 - User Manual
78/88 Maintenance
Operating display
1.
All segments of the
display are
illuminated
Display check
2.
R
Enter service menu Set mode
3.
Enter set mode Identification
number
4.
Select required
setting
Date, old value
5.
R
Select digit to be
changed
Digit flashes
6.
Change digit value Digit flashes
7.
R
Select digit to be
changed
Next digit flashes
8. Repeat steps 5 - 7 for all digits to be changed Al digits flash
simultaneously
9.
R
Confirm new
setting
Date, new value
10. Repeat steps 3 - 8 for all settings to be changed
11.
Advance display until End
12.
Back to service
menu
End of set mode
7.3 Change Battery
7.3.1 When to Change Battery
If the meter is provided with a battery, this must be changed if one of the
following events occurs:
• The symbol appears in the liquid crystal display.
• During the normal calibration cycle of the meter.
• The battery charge indicates less than 4.8 V (can be read under code
C.6.1 in service list).
Note
Indication of symbol “BAT LOW”
Only meters with the parameter set to allow the battery symbol
will display it at a low battery condition.
The meter functions perfectly well without a battery.