![Landis+Gyr ZMQ202 User Manual Download Page 75](http://html1.mh-extra.com/html/landis-gyr/zmq202/zmq202_user-manual_3565660075.webp)
H 71 0200 0215 f en - ZMQ202 / ZFQ202 - User Manual
Gyr
Maintenance
75/88
7 Maintenance
Based on our experience as long-term meter manufacturers, electronic
meters require no maintenance.
Note
Meter modifcation
No conversion, modification or retrofitting of the meter is allowed unless
stated in this chapter!
7.1 Meter
Tests
A meter accuracy check should be performed periodically according to
national regulations, usually every 8 years.
When testing the meter, the measuring conditions and the measuring
points must follow the IEC meter standards.
Use test equipment according to regulations for Cl.0.2S.
7.1.1 Measuring
Times
Metering Point
Measuring Time
1%In cos
ϕ
= 1
90 s
2%In cos
ϕ
= 0.5
90 s
all-phase
100%In cos
ϕ
= 1
10 s
single phase
100%In cos
ϕ
= 0.5
40 s
7.1.2 Optical
Test
Outputs
The green optical test outputs supply pulses at a frequency dependent on
the load applied and the meter constant R. The pulse’s rising edge is
always decisive for the test.
After switch on of voltage and current, wait 1 second for measurement to
be started.
The impulse frequency at nominal load Pn is between 4 and 6 Hz.
7.1.3 Test
Transmitting
Contacts
The test transmitting contacts are checked for accuracy with the same test
as for the optical test outputs.
Summary of Contents for ZMQ202
