Landis+Gyr ZMQ202, User Manual

Page: 27 / 88

H 71 0200 0215 f en - ZMQ202 / ZFQ202 - User Manual Gyr
Description of Unit 27/88
2.12 Communication Unit (Option)
The optional communication unit is a complete unit housed in its own case.
If mounted, it is situated under the front cover. Therefore, it is secured by
a utility seal and can be mounted and replaced in the field if necessary. It
contains communication interfaces (e.g. RS232, RS485, modem) as
required for remote reading of the meter data. Two different
communication units are available.
2.13 Software Tools
There are two software tools available with the meter, which enable easy
parameter setting and communication with the meter.
The software Gyr MAP190 is used for setting up complete
parameter sets off-line (parameter editor). The prepared parameter sets
can then be downloaded to the meter via the optical interface. The
software MAP190 is used for the order processing by regional companies.
The software Gyr MAP120 is used:
• to communicate with the meter according to dlms
• to perform service tasks
• to set certain parameter ranges such as primary data, the time switch
etc.
• to reparameterise the meter and the communication unit
MAP190
MAP120