Landis+Gyr ZMQ202, User Manual

Page: 49 / 88

H 71 0200 0215 f en - ZMQ202 / ZFQ202 - User Manual Gyr
Installation / De-installation 49/88
Check the phase
angles:
Note: Current
must be flowing to
show the phase
angles
Phase angle U(L1) Code 81.7.0
Phase angle U(L2) Code 81.7.1
Phase angle U(L3) Code 81.7.2
Phase angle I (L1) Code 81.7.4
Phase angle I (L2) Code 81.7.5
Phase angle I (L3) Code 81.7.6
9.
Back to operating
display
End of installation
diagnostic
4.4.2 Set Date and Time
Operating display
1.
All segments of the
display are
illuminated
Display check
2.
R
Enter service menu Set mode
3.
Enter set mode Identification
number
4.
Select required
setting
Date, old value
5.
R
Select next digit to
be changed
Digit flashes
6.
Change digit value Digit flashes
7.
R
Select digit to be
changed
Next digit flashes
8. Repeat steps 5 - 7 for all digits to be changed All digits flash
simultaneously
9.
R
Confirm new
setting
Date, new value
10. Repeat steps 3 - 8 for all settings to be changed
11.
Advance display until End
12.
Back to operating
display
End of set mode