Landis+Gyr ZMQ202, User Manual

Page: 67 / 88

H 71 0200 0215 f en - ZMQ202 / ZFQ202 - User Manual Gyr
Service 67/88
6 Service
6.1 Alarm Reset Button
R
Access to the alarm reset button is protected by the utility's seal. It is
located behind the front door of the wall-mounted f6 and behind the
front cover of the rack-mounted f9.
The alarm reset button has three functions:
1. Reset an alarm. Meter failure alarms are cleared by pressing the alarm
reset button.
2. Select the Service Menu from the display check.
3. Perform the cursor function in Set Mode.
6.2 Service Menu
R
Operating display
Display check
Set mode
Service list
Installation diagnostic
Battery on/off display
End of service menu
Short press down display button (<2s)
Long press down display button (>2s)
Short press up display button (<2s)
Long press down display button (>2s)
Short press down display button
until "End" is displayed then
long press down display button
Alarm reset button (under utility's seal)
Operating menu
Service menu
R
Test mode