Landis+Gyr ZMQ202, User Manual

Page: 42 / 88

Gyr H 71 0200 0215 f en - ZMQ202 / ZFQ202 - User Manual
42/88 Installation / De-installation
4.2 Connect f6
Note
Assumption of mounted meter
It is assumed that the meter is already mounted. How to mount the meter
is described in section
3.11 Mounting f6 .
4.2.1 Terminal Connection Diagram
The f6 is connected according to the Terminal Connection Diagram located
in the front door. The following is an example.
4.2.2 Terminal Layout
Pulse transmitting contacts
Energy flow contacts
Static output contact
Communication unit
Additional power supply
Tariff control inputs
RS485
interface
I1 I1 I2 I2 I3 I3
U1 U2 U3 N
Alarm contact
Synchronisation input
The 12 spring clamp connectors are located on the transmitting module
and transmit measured values as pulses to telemetering instruments. They
are passive output contacts, i.e. controlled by the receiver.
The function of each connector depends on the connected PCB. Assigning
the functions to the corresponding connector is determined in the software.
The connector numbers remain the same, whichever PCB is connected.
Transmitting
contacts