92
Technical specifications
Power take off
Standard type in compliance with A.S.A.E. standards on
the rear part of the tractor.
Rated diameter of shaft: 34.9 mm. (1 3/8").
Number of splines: 6.
Spinning direction: clockwise, viewed from behind.
Operation: independent and synchronized with the
gearbox.
Rotation speeds with independent operation:
540 RPM with a 1944 RPM engine rate.
540E RPM with a 1392 RPM engine rate on request.
1000 RPM with a 1916 RPM engine rate.
Rotation speed with synchronized operation (PTO
revoltuions per rear wheel wheel turn):
Mod. 5860-6060-6860
9.185 revolutions with PTO at 540 RPM.
12.822 revolutions with PTO at 540E RPM.
Direct power take off
Installed at the rear part of the tractor, above the PTO
shaft.
Nominal diameter of shaft: 34.9 mm. (1 3/8").
Number of splines: 6.
Spinning direction: clockwise.
Same rotation speed as engine.
Engaged by means of the power take-off lever.
Brakes
Multidisc oil cooled brakes on rear differential half
shafts.
Number of disks per braking unit:
5860-6060-6860 ...................................................
4 discs
7860-8860 ............................................................
5 discs
Hydrostatic braking control by means of two pedals on
the operators right: the two pedals can be coupled
together by a locking device to provide simultaneous
braking action on both sides.
Parking brake controlled by an independent hand lever
and linkages acting directly on main brakes.
2 WD front axle
Boxed front axle turning around the central pivot.
Track adjustment by telescoping at the ends of the
shaft.
Max. turning radius .................................................... 52°
8860 - Speeds
in Km/h with engine at top power rate
(2200 RPM).
REAR TYRES
RANGE
GEAR
14.9/13.30 12.4/11-36 16.9/14-30
Low
1st
1.67
1.71
1.72
2nd
2.62
2.69
2.71
3rd
3.31
3.40
3.42
4th
4.88
5.02
5.05
Standard
1st
3.98
4.09
4.12
2nd
6.26
6.44
6.48
3rd
7.91
8.13
8.18
4th
11.67
11.99
12.07
High
1st
9.83
10.10
10.17
2nd
15.44
15.87
15.98
3rd
19.51
20.05
20.19
4th
28.77
29.56
29.76
Reverse
1st
4.45
4.57
4.61
2nd
7.00
7.19
7.24
3rd
8.84
9.08
9.14
4th
13.04
13.40
13.49
Mod. 7860-8860
9.914 revolutions with PTO at 540 RPM.
13.839 revolutions with PTO at 540E RPM.
18.620 revolutions with PTO at 1000 RPM.
Engagement and selection of the PTO operating mode
by means of the lever on the left-hand side of the
gearbox.
17.252 revolutions with PTO at 1000 RPM.
