background image

Introduction 

MR1572 & HR2572 Retractable Box Scraper 305-083M

11/28/18

5

Table of Contents

Introduction

Owner Assistance

The dealer should complete the Online Warranty 
Registration at the time of purchase. This information is 
necessary to provide you with quality customer service.

The parts on your Box Scraper have been specially 
designed by Land Pride and should only be replaced with 
genuine Land Pride parts. Contact a Land Pride dealer if 
customer service or repair parts are required. Your Land 
Pride dealer has trained personnel, repair parts, and 
equipment needed to service the implement.

Serial Number

For quick reference and prompt service, record model 
and serial number on the inside cover page and again on 
the warranty page. Always provide model number and 
serial number when ordering parts and in all 
correspondences with your Land Pride dealer. For 
location of your serial number plate, see Figure 1.

Serial Number Plate Location

Figure 1

Further Assistance

Your dealer wants you to be satisfied with your new Box 
Scraper. If for any reason you do not understand any part 
of this manual or are not satisfied with the service 
received, the following actions are suggested:

1.

Discuss any problems you have with your implement 
with your dealership service personnel so they can 
address the problem.

2. If you are still not satisfied, seek out the owner or 

general manager of the dealership, explain the 
problem, and request assistance.

3. For further assistance write to:

Land Pride Service Department

1525 East North Street

P.O. Box 5060

Salina, Ks. 67402-5060

E-mail address

[email protected]

NOTE:  

A special point of information that the 

operator should be aware of before continuing. 

23743

Land Pride welcomes you to the growing family of new 
product owners. This Box Scraper has been designed 
with care and built by skilled workers using quality 
materials. Proper assembly, maintenance, and safe 
operating practices will help you get years of satisfactory 
use from this machine. 

Application

The Land Pride MR1572 (mechanical retractable) and 
HR2572 (hydraulically retractable) Box Scrapers are 
designed for Category 1- three point hitch mounting. The 
MR1572 model has a 72" working width and is adapted 
for attaching to 4-wheel drive tractors in the 15-40 hp 
ranges and 2-wheel drive tractors in the 15-50 hp ranges. 
The HR2572 model has a 72" working width and is 
adapted for attaching to 4-wheel drive and 2-wheel drive 
tractors in the 30-60 hp ranges.

The easy and convenient retractability of the scarifier 
shanks on these models makes them highly productive 
and ideal for ripping, leveling, finish grading, and 
backfilling applications at commercial feedlots, outdoor 
arenas, building sites, and maintenance operations on 
farm and ranch lanes or roadways or constructions sites. 

The mechanical or hydraulic retractable ripping shanks in 
combination with the 19" moldboard design on the 
15 Series and 21" double-thick moldboard design on the 
25 Series make these units especially effective and 
productive for construction projects. Quick hitch 
compatibility makes them even more desirable for 
commercial applications.

See 

“Specifications & Capacities” 

on page 18 and 

“Features & Benefits”

 on page 17 for additional 

information and performance enhancing options.

Using This Manual

This Operator’s Manual is designed to help familiarize 
you with safety, assembly, operation, adjustments, 
troubleshooting, and maintenance. Read this manual 
and follow the recommendations to help ensure safe 
and efficient operation. 

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com.

Terminology

“Right” or “Left” as used in this manual is determined by 
facing the direction the machine will operate while in use 
unless otherwise stated.

Definitions

IMPORTANT: 

A special point of information related 

to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

Summary of Contents for MR 1572



























Reviews: