![background image](http://html1.mh-extra.com/html/land-pride/mr-1572/mr-1572_operators-manual_3505748020.webp)
Section 5: Maintenance & Lubrication
Retractable Box Scraper 305-083M
11/28/18
16
Pivot Tube and Cylinder Ends
Type of Lubrication: Multi-purpose Grease
Lubrication Points
25
Hours
23756
50
Hrs
Multi-purpose
spray lube
Multi-purpose
grease lube
Multi-purpose
oil lube
Intervals in hours at which
lubrication is required
Lubrication
Legend
Long-Term Storage
Clean, inspect, service, and make necessary repairs to
the implement when storing it for long periods and at the
end of the season. This will help to ensure the unit is
ready for field use the next time you hook-up to it.
1.
Clean off loose and compacted dirt that may have
accumulated on the scraper and cutting blades and
then wash surfaces thoroughly with a garden hose.
2. Check shank bars and plow bolts for wear and
replace if necessary. For additional instructions, see
3. Inspect Box Scraper for loose, damaged, or worn
parts. Adjust and tighten loose parts. When needed,
replace parts with genuine Land Parts only.
4. Repaint parts where paint is worn or scratched to
prevent rust. Ask your dealer for Land Pride aerosol
touch-up paint. They are also available in touch-up
bottles with brush, quarts, and gallon sizes by adding
TU, QT, or GL to the end of the aerosol part number.
Land Pride Touch-up Paint
Part No.
Part Description
821-011C
PAINT LP BEIGE SPRAY CAN
821-066C
PAINT ORANGE SPRAY CAN
821-070C
PAINT GP GLOSS BLACK SPRAY CAN
5. A light coating of oil or grease may be applied to the
lower shank bars, inside the mold board, and inside
the side panels in lieu of paint to minimize oxidation.
6. Replace all damaged or missing decals.
7.
Store Box Scraper on a level surface in a clean, dry
place. Inside storage will reduce maintenance and
make for a longer scraper life.
Ordering Replacement Parts
Land Pride offers equipment in factory standard Beige
with black highlights. This implement is also available in
Orange.
When ordering an optional color, the suffix number
corresponding to the color must be added at the end of
the part number. Parts ordered without the suffix number
will be supplied in factory standard colors.
For example, if you are ordering a replacement part with
part number 555-555C and the existing part is orange,
then add the suffix 82 to the end of the number to make
the part number read 555-555C82.
82 . . . . . . . Orange
85 . . . . . . . Black